The Cel-Fi GO G41 repeater is a professional 3G and 4G mobile phone repeater which is a step up from the G31 mobile phone repeater and has the option to select Telstra, Optus or Vodafone from the nextivity WAVE app (See below for WAVE app store links). This means that if you change mobile phone network providers then you can just swap it over in the app.

The other advantage of the G41 over the G31 is that it boosts 2 bands simultaneously whereas the G31 is a single band booster. What this means is that you can have 3G and 4G boosting at the same time, or you can have 2 by 4G bands boosting at the same time. 

The G41 also has 100dB system gain and is network safe and approved with ACMA in Australia.

Nextivity CelFi G41 will boost the phone network allowing you to use your phone for voice and data calls in places where phone service was previously not available.

The G41 works on bands 1, 3, 5, 7, 8, 28L & 40 whereas the G31 only works on bands 3, (Telstra 5), (Optus 8) & 28 which means that if you have a phone tower that is broadcasting bands 1, 7 or 40 nearby then your phones will probably select one of those bands over the Cel-Fi G31 boosted bands and you will think that the G31 isn't working. The G41 will solve this issue.

The Cel-Fi GO G41 Smart Signal Repeater is designed to solve cellular coverage problems for voice and data. With support for 5G NR operation in traditional LTE bands, the system supports seamless migration to 5GNR once approved by the network providers. At up to 100 dB of gain, it is the most powerful carrier grade solution available. The GO G41 covers up to 3,000 square metres of indoor space per system which is slightly more than the G31 at 2,500 square metres. The Go G41 is also available from us in kit form with antennas and cables or choose from our extensive list of materials to make up your own kit to suit your needs.

Cel-Fi G41 Attributes:

Works on 3G & 4G Voice and Data
Covers up to 3,000 m2 area
Multi-Band Support
IP20 Indoor Rated
Network Safe

Download Nextivity Cel-Fi WAVE and MyWAVE Apps

Cel-Fi WAVE APP
Mobile App for Registration, System Set up and Changing Modes.

or scan the QR code below with your devices QR scanner

Cel-Fi MyWAVE APP
Mobile App to enable your Cel-Fi Go to automatically track the same cellular base station/tower as your phone which reduces drop-outs when travelling between towers.

or scan the QR code below with your devices QR scanner