CelFi GO G41 In-Building Mobile Phone Repeater Kit + RFI 11dBi Enclosed LPDA + Low Profile Ceiling Antenna

In stock

Quick Overview

CelFi Go G41 In-Building Mobile Phone Repeater for Telstra, Optus or Vodaphone Carriers. Featuring an RFI 11dBi Enclosed LPDA Directional antenna on the outside and a single low profile ceiling mount antenna on the inside.


On all in-stock items

Customize CelFi GO G41 In-Building Mobile Phone Repeater Kit + RFI 11dBi Enclosed LPDA + Low Profile Ceiling Antenna
Cel-Fi GO G41 Repeater for Telstra Optus or Vodafone Multi Carrier Dual Band with 240V AC Power Supply   + $0.00
RFI LPDA7040 5G 11dBi Wideband Directional Antenna 0.3m Cable N Connector   + $0.00
RFI DAS3827LP Cellular Low Profile Ceiling Mount Antenna 30Cm Flylead N Connector   + $0.00
10m RG58 SMA Male to N Male Pulse Cellular Coaxial Cable   + $0.00
30cm Self Amalgamating Weatherproof Sealant Tape for 1 Cable Connection   + $0.00

* Required Fields

Your Customization
Cel-fi building kit with RFI LPDA donor and low profile ceiling mount antennas
CelFi GO G41 In-Building Mobile Phone Repeater Kit + RFI 11dBi Enclosed LPDA + Low Profile Ceiling Antenna

In stock



    The Cel-Fi GO G41 repeater is a professional 3G and 4G mobile phone repeater which is a step up from the G31 mobile phone repeater and has the option to select Telstra, Optus or Vodafone from the nextivity WAVE app (See below for WAVE app store links). This means that if you change mobile phone network providers then you can just swap it over in the app.

    The other advantage of the G41 over the G31 is that it boosts 2 bands simultaneously whereas the G31 is a single band booster. What this means is that you can have 3G and 4G boosting at the same time, or you can have 2 by 4G bands boosting at the same time. 

    The G41 also has 100dB system gain and is network safe and approved with ACMA in Australia.

    Nextivity CelFi G41 will boost the phone network allowing you to use your phone for voice and data calls in places where phone service was previously not available.

    The G41 works on bands 1, 3, 5, 7, 8, 28L & 40 whereas the G31 only works on bands 3, (Telstra 5), (Optus 8) & 28 which means that if you have a phone tower that is broadcasting bands 1, 7 or 40 nearby then your phones will probably select one of those bands over the Cel-Fi G31 boosted bands and you will think that the G31 isn't working. The G41 will solve this issue.

    The Cel-Fi GO G41 Smart Signal Repeater is designed to solve cellular coverage problems for voice and data. With support for 5G NR operation in traditional LTE bands, the system supports seamless migration to 5GNR once approved by the network providers. At up to 100 dB of gain, it is the most powerful carrier grade solution available. The GO G41 covers up to 3,000 square metres of indoor space per system which is slightly more than the G31 at 2,500 square metres. 

    Cel-Fi G41 Attributes:

    Works on 3G & 4G Voice and Data
    Covers up to 3,000 m2 area
    Multi-Band Support
    IP20 Indoor Rated
    Network Safe


    Items in kit include:

    1x Cel-fi Go G41 Stationary Unit + 240v Power Supply

    1x RFI LPDA Enclosed Directional Antenna

    1x RFI Internal Low Profile Disc Ceiling Antenna

    All Cables required for connection

    More Information
    Cellular CarrierTelstra
    Input Voltage9.6 to 28.8 VDC
    RF GainUp to 100dB gain


    We're here to help!


    If you've got any queries, call us on +61 7 3180 3840, or flick us a message below.